Stony Point, NY Equipment Auction Ending 11/18

More Info / Bid Track Item Register

Excavator bucket appears to be a general-purpose digging bucket with four teeth, designed for a mid-sized excavator. The casting marks on the side show partial identification, possibly reading "9G6062" or "9G6069", which aligns with Caterpillar (CAT) bucket part numbers used for 315/320 class excavators.

More Info / Bid Track Item Register

Heavy-duty digging bucket designed for a large excavator, featuring four replaceable teeth and reinforced side cutters for added penetration and wear resistance. The bucket shows full wrap-around wear plates and heavy gusseting on the ear assembly, typical of quarry or trenching applications. Its design and proportions suggest compatibility with machines in the CAT 330–336 size class or comparable models from other manufacturers.

More Info / Bid Track Item Register

General-purpose excavator bucket with four teeth and reinforced cutting edges, designed for mid-sized machines. The bucket includes a weld-on hook and gusseted ears for pin-on attachment. The partially visible identification plate and paint color suggest it is an original Caterpillar OEM bucket, likely built for the CAT 320 or 325 series excavators.

More Info / Bid Track Item Register

Compact CAT trenching bucket designed for precision digging and narrow trench applications. It features four replaceable teeth and a curved shell for efficient material release. The reinforced mounting ears and side plates provide durability under load, while the profile and pin spacing indicate compatibility with CAT 312–315 series excavators.

More Info / Bid Track Item Register

Heavy-duty CASE excavator bucket featuring four teeth and a reinforced shell for durability in demanding digging applications. The bucket includes a built-in lifting hook on the back plate and gusseted ear construction for strength at the mounting points. Its proportions and pin spacing suggest compatibility with CASE 160–200 series excavators or similar models.

More Info / Bid Track Item Register

Narrow trenching bucket built for precision excavation and utility work. It features two teeth with a deep, curved profile ideal for narrow trench cutting and pipe installation. For use with CAT 416 or older 420 backhoe.

More Info / Bid Track Item Register

Narrow HDP trenching bucket measuring approximately 12 inches wide, designed for detailed excavation and utility trench work. It features two replaceable teeth and a curved shell for efficient digging and clean trench formation. For use with CAT 416 or older 420 backhoe.

More Info / Bid Track Item Register

Backhoe bucket featuring a mounting structure composed of two pin ears. The front edge is fitted with three teeth. For use with CAT 416 or older 420 backhoe.

More Info / Bid Track Item Register

Cat steel backhoe bucket with three replaceable teeth. For use with CAT 416 or older 420 backhoe.

More Info / Bid Track Item Register

Trenching bucket constructed of steel, featuring a narrow width and an angled profile suited for utility and cable installation work. The front cutting edge is fitted with three teeth, and the top mounting structure utilizes a pin-on style bracket complete with connecting pins. The attached identification plate specifies compatibility with CAT 416C, 426C, 436C, 428C, and 438C model machines, indicating a width of 305 mm or 12 inches and a capacity of 0.07 or 0.09 yd

More Info / Bid Track Item Register

Four Cat skidsteer eight lug rims. An attached identification decal specifies a wheel size of 16.5 x 9.75 with a 6.00B backspacing and includes the part number 271210.

More Info / Bid Track Item Register

Air compressor mounted on a wooden base, finished primarily in a faded green and reddish-brown paint. It features an electric motor connected to a single-stage compressor pump via a belt drive enclosed by a removable wire mesh guard. The unit includes a control box and a tank-mounted valve assembly. An attached identification plate indicates the item is a Brunner Manufacturing Corp. model 200H6 with a maximum working pressure of 175 LBS, and a second tank plate identifies the manufacturer as Wood Ind. Proc. Conshohocken, PA.

More Info / Bid Track Item Register

WACKER Model PT3A trash pumps with a HONDA GX240 8.0 hp electronic ignition engine. The specification plate indicates each pump has a capacity of 400 gpm (gallons per minute) and a maximum head lift of 29 meters or 96 feet, with a total weight of 64 kg or 141 lbs. For parts or repair.

More Info / Bid Track Item Register

Two aluminum tool boxes with a diamond plate finish. The larger box is identified by a label as a 60 INCH CHEST with part number 648729 and displays a HUSKY brand plaque near the lid. The second box, positioned behind the first, features a TRAIL FX emblem on the lid and a separate label identifying it as a KEYSTONE ALUMINUM TOOL BOX, Model KYS738LPI.

More Info / Bid Track Item Register

Two white metal crossover truck tool boxes stacked on a wooden pallet, with one sitting on top of the other. The top box displays a painted blue number "35" on its lid, and a visible emblem identifies it as a DELTA PRO model. The larger box underneath features a PAYLOAD PLUS decal on its side.

More Info / Bid Track Item Register

Two white metal storage boxes designed to mount to the side of a utility or flatbed truck. Both boxes are branded TRACTOR SUPPLY CO with visible DELTA decals, one of which identifies the model as 876000R2 with a production date of 08/11/04. Each box features two separate latching compartments with drop-down doors, and the interior of one compartment contains wooden dividers.

More Info / Bid Track Item Register

Two heavy-duty truck or trailer tires of different brands, both in a tubeless, radial construction. The tire on the left is a CONTINENTAL branded tire, marked "REGROOVABLE," with a maximum single load capacity of 2500 kg. The tire on the right is a GENERAL branded tire, size 11R22.5, with a visible load range H rating and a maximum single load capacity of 3000 kg.

More Info / Bid Track Item Register

ESSICK MFG. CO. single drum vibratory roller featuring a self-contained, walk-behind design with an orange painted frame and drum. The machine is powered by a KOHLER MAGNUM 12 electronic ignition engine. The drive assembly is housed within the frame, and a clear plastic tank is mounted above the engine for water or fluid storage. Seller reports operates as intended.